Print Back

Construction
Extruded PTFE tube with stainless steel single wire braid.

Application
Hot air, steam, compressor discharge and most chemical reactions. Not recommended for steam-cold water cycling.

Operating Temperature Range
-100°F to +500°F (-73°C to +260°C)

SAE 100R14A

-Maximum negative pressure for -06 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -06 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger PRFE hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected.


PTFE Crimp Fittings
Aeroquip 2807 PTFE Hose
Unit of Measure
1 

Item #

Hose I.D.

Hose O.D.

Max. Operating Pressure

Min. Burst Pressure

Min. Bend Radius

Vacuum Service

Weight/ft.

List Price

2807-3 N/A 0.14 inches N/A 0.25 inches N/A 3000 psi N/A 12000 psi N/A 1.50 inches N/A 28 inches of Hg N/A 0.04 lbs. QUOTE
2807-4 N/A 0.19 inches N/A 0.30 inches N/A 3000 psi N/A 12000 psi N/A 2.00 inches N/A 28 inches of Hg N/A 0.06 lbs. QUOTE
2807-5 N/A 0.26 inches N/A 0.37 inches N/A 3000 psi N/A 12000 psi N/A 3.00 inches N/A 28 inches of Hg N/A 0.08 lbs. QUOTE
2807-6 N/A 0.32 inches N/A 0.43 inches N/A 2500 psi N/A 10000 psi N/A 4.00 inches N/A 28 inches of Hg N/A 0.10 lbs. QUOTE
2807-8 N/A .42 inches N/A .54 inches N/A 2000 psi N/A 8000 psi N/A 5.25 inches N/A 28 inches of Hg N/A .12 lbs. QUOTE
2807-10 N/A .51 inches N/A .63 inches N/A 1500 psi N/A 6000 psi N/A 6.50 inches N/A 28 inches of Hg N/A .16 lbs. QUOTE
2807-12 N/A .64 inches N/A .76 inches N/A 1200 psi N/A 4800 psi N/A 7.75 inches N/A 28 inches of Hg N/A .18 lbs. QUOTE
2807-16 N/A .88 inches N/A 1.03 inches N/A 1000 psi N/A 4000 psi N/A 9.00 inches N/A 12 inches of Hg N/A .26 lbs. QUOTE
2807-20 N/A 1.12 inches N/A 1.29 inches N/A 625 psi N/A 2500 psi N/A 16.00 inches N/A 12 inches of Hg N/A .34 lbs. QUOTE
Unit of Measure
1