Internal hose: Synthetic rubber, extruded whole without joints, of uniform thickness.
Reinforcement: 4 high tensile steel wire spirals up to size 1”, 6-spirals from size 1 ¼”.
Covering: Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions.
Recommended fluid: Petroleum-based hydraulic fluids (mineral oils), glycol-water based, water, lubricants.
Operating temperature: -40°F to +250°F (-40°C to +121°C) Continuous; -40°F to +257°F (-40°C to +125°C) Intermittent; -40°F to +158°F (-40°C to +70°C) for water based fluids; +32°F to +158°F (0°C to +70°C) for water.
Applications: Construction, Marine & Offshore, Industrial Hydraulics, Jet Grouting, Mining & Drilling, Earth Moving
Type Approval: MSHA, ABS
Applicable Specs: EXCEEDS EN 856 SAE 100R13 – ISO 3862 R13
Isobaric pressure rating 350 bar/5000 psi. Impulse tested up to 1,000,000 cycles.
Note: Approved for use with “X” Series One-Piece, No-Skive Fittings.
I.D. |
N/A 3/4 in |
Hose Size |
N/A 12 |
O.D. |
N/A 32.1 mm |
Max. Working Pressure |
N/A 5075 psi |
Min. Burst Pressure |
N/A 27840 psi |
Min. Bend Radius |
N/A 9.449 in |
Weight |
N/A 1.103 lbs/ft |
Ferrule |
N/A 004N-12 |
