Hose Fittings
hose-fittings
Flow Chief Ferrules
(38) Features:- The ferrule ID's are designed in increments of 1/16"
Dixon Sanitary Crimp Ferrules
(24) Features:- Manufactured in AISI 304 stainless steel.
- Ferrules have a surface finish of 63 or better.
King Combination Nipples (Sanitary)
(24) Features:- Combination nipples are recommended for low-pressure discharge and suction service for compatible liquids.
They are not for compressible products such as air or nitrogen on sizes 1 1/4" and above.- King Combination Nipples are not recommended for steam.
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
T-Bolt Clamps (Stainless Steel)
(46) Features:- T-bolts can be applied with a standard 7/16" socket wrench
- 3/4" wide 300 series stainless steel band, 0.025" thick
- Style TBC has alloy steel bolt with torque rating of 70 in/lbs
- Style STBC has 300 series stainless steel bolt with torque rating of 50 in/lbs
