Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
  • Made from natural latex rubber, a thermoset material
  • Excellent resilience, tear, and tensile strength
  • Made from non-toxic ingredients conforming to FDA standards
  • Extremely elastic with excellent memory after repeated stretching
  • Contains no plasticizers which can migrate and cause flow contamination or tube hardening
  • NEWTEX is a translucent amber color.
Notes

NEWTEX tubing is an exceptionally resilient material that has notable wear resistance, very low permanent set characteristics, and excellent flexibility at low temperatures.

NEWTEX will withstand repeated sterilization with autoclaving at 250ºF for 20 minutes. It will also endure limited sterilization with ethylene oxide or gamma radiation.

Since natural rubber NEWTEX has some protein trace (an allergen), synthetic NEWTEX (polyisoprene) made without protein can be supplied through minimum order. Synthetic NEWTEX can also be cured in straight lengths. Synthetic NEWTEX should also be considered for its translucency, as natural latex's amber color is quite dark.

Also available through special order is vacuum-rated, red-colored NEWTEX.

Note that NEWTEX may have multiple pieces per length of tubing. This is due to the material's manufacturing limitations.
Unit of Measure

Specifications

I.D.

 N/A 3/16 in

O.D.

 N/A 0.375 in

Wall

 N/A 3/32 in
Standard Coil Length1 N/A 100 ft

Weight/100 ft.

 N/A 4.00 lbs

Notes

 N/A Sold by standard coil length only.

Physical Properties

Hardness, Shore A ±5

 N/A 35

Min. Tensile Strength

 N/A 3500 psi

Min. Elongation at Break

 N/A 750 %

Brittle Temperature

 N/A -60 ºF

Max. Operating Temp.

 N/A 180 ºF

Notes

 N/A Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
  • 1 Tubing may have a maximum of five sections, with a minimum section length of 4 feet, in 100 ft. lengths; a maximum of three sections, with a minimum section length of 4 feet, in 50 ft. lengths.