Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
Chemfluor® PTFE Fluoropolymer Helically Convoluted Inner Tube
Platinum-Cured Silicone Cover
Stainless Steel Braid, Low Profile

Features & Benefits

See Chemfluor® fluoropolymer inner tubes (WCS/BCS)
Silicone Cover
  • Durable, extremely flexible, ultra pure platinum-cured silicone
  • Extruded directly over WCS Series hose
  • Extremely smooth for easy cleaning and assured sterility
  • No place for bacteria to accumulate
  • Hose assemblies may be autoclaved or SIP cleaned
  • Cover is locked to stainless steel braid reinforcement so that hose and cover flex as one unit, with no bulges or creases; tear resistance also improved due to right fit
  • Braid fraying minimized, reducing risk of hand injuries from wire braid punctures
  • Enhanced thermal insulating properties
  • Burn potential from accidental contact greatly reduced
Unit of Measure

Specifications

Inside Diameter

 N/A 0.75 in19.1 mm

Outside Diameter

 N/A 1-1/8 in28.5 mm
Max. Length1 N/A 100 ft

Max. Working Pressure

 N/A 1375 psi9.48 MPa
Min. Burst Pressure2 N/A 5500 psi37.92 MPa

Min. Bend Radius

 N/A 2.25 in57.15 mm
Vacuum Hg (@ 70ºF)3 N/A 29.9 in75.95 mm

Weight

 N/A 0.30 lbs/ft0.45 kg/m

Applications

N/A

  • Wash down hoses
  • Transfer lines
  • Equipment lines
  • Filling equipment

Common Media

N/A

  • Caustic solutions
  • Ultra pure water (DI)
  • Clean steam (low pressure)
  • Mascara/creams/lotions

Details

N/A Construction:

  • Inner Tube:
    -Chemfluro® PTFE fluoropolymer inner tube
  • Cover: Platinum-cured silicone
  • Reinforcement:
    -304 stainless steel braid
    -High tensile strength
Fittings
  • PermaSeal® crimp-style
    -Over 40 styles in a wide range of materials
    -Standard: 316L stainless steel
    -Single stainless steel crimp collar design locks in hose fitting and seals off silicone cover, which prevents cleaning media from seeping under cover
    -This design eliminates the need for a secondary crimp collar or plastic heat shrink tubing
    -Also assures hose pressure rating to rated operating pressure

Engineering Specifications

N/A Temperature Rating

  • -65ºF to +450ºF
  • -54ºC to +232ºC

Industry Approvals & Compliances

N/A

  • FDA (TWOK only)
  • Pharmacopeia Class VI

Pressure Rating

N/A Burst Pressure ratings at ambient 70ºF (21ºC).
Vacuum rating @ minimum bend radius (72ºF).
Consult factory on sizes 1-1/4" through 2" or for anti-static BCS Series with silicone cover.

  • 1 Maximum length may vary. Length supplied will be based on full coil length in stock ±25% of the order length.
  • 2 Burst Pressure ratings at ambient 70º F (21º C).
  • 3 Vacuum Rating @ minimum bend radius (72º F)