Print Back
Joints for Rigid Straight Pipe-2
Unit of Measure
Items Image
NH1600C038B0200
Joints for Rigid Straight Pipe
Image
NH1600D038B0200
Joints for Rigid Straight Pipe
Image
NH1600N038B0200
Joints for Rigid Straight Pipe
Image
NH1600S038B0200
Joints for Rigid Straight Pipe
Image
NH1600V038B0200
Joints for Rigid Straight Pipe
Pipe Size N/A 0.38 in
Pipe O.D. N/A 0.675 in
Type N/A Standard
Gasket Material N/A BUNA-N (Standard) N/A EPDM N/A BUNA-N (High Temperature) N/A Silicone N/A Fluorocarbon
Sleeve Material N/A Plated Steel (Standard)
Dimension A N/A 2.00 in
Dimension B N/A 1.48 in
Dimension C N/A 2.34 in
Allowable Misalignment N/A ±4º per end
Gasket Temperature Rating1 N/A Oils -25ºF to +212ºF (-32ºC to +100ºC) Water -25ºF to +180ºF (-32ºC to +82ºC) N/A Water and water/glycol mixture +20ºF to +275ºF (+29ºC to +137ºC) N/A Oils -25ºF to +250ºF (-32ºC to +121ºC) Water and Steam -25ºF to +225ºF (-32ºC to +107ºC) N/A -65ºF to +350ºF (-54ºC to +177ºC) N/A -25ºF to +450ºF (-32ºC to +232ºC)
Pressure Rating2 N/A 2.07 MPa 300 psi
Vacuum Rating N/A 1.79 bar 25 in. Hg
Notes N/A Sleeve in this size is cylindrical (no-bulge). Allowable misalignment is ±2º per end for this size.
  • 1 Maximum temperature ratings are meant as a guide only.
    For extreme temperature conditions, consult factory.
  • 2 Warning: The Flexmaster joint is designed to seal pipe and tube connections. The Flexmaster joint is not intended to hold piping systems together. Normal hangers, guides, anchors and other external piping restraints must be used to restrain the piping or tubing system from movement.