Dunham Rubber & Belting Corporation
Dunham Rubber & Belting Corporation
682 Commerce Parkway West Drive, Greenwood, IN 46143
Toll Free: 800.876.5340
Tel: 317.888.3002
Fax: 317.888.2335
Email: mail@dunhamrubber.com
Print Back
  • 90º sanitary elbows in mini and sanitary clamp styles
  • Sanitary connection matches hose barb size
Materials
  • 316L stainless steel
Surface Finish
  • Average 15 Ra or better
Unit of Measure

Specifications

Type

 N/A Full Size Elbow

Hose Size

 N/A 1.00 in25.40 mm

"A" Centerline Fitting End

 N/A 4.90 in124.33 mm

"B" Centerline to Face

 N/A 2.00 in50.80 mm

"C" Wall Thickness

 N/A 0.07 in1.65 mm

"D" Fitting Outer Dia.

 N/A 1.98 in50.29 mm

Standards

N/A

  • To industrial standards
  • Gasket face dimensions are standard to industry specifications

Alternative Styles

N/A

  • 1/2" and 3/4" are mini style (straight sizes only)
  • 1" through 4" sanitary clamp style (straight sizes only, no "step up" sizes available)
  • Standard in 90º elbow configurations (45º elbows available by special order)
  • Electropolished version available

Technical Data

N/A

  • Reduces strain on hoses by eliminating 90º hose configuration
  • Eliminates entrapment, reduces connection points and potential bacteria growth areas
  • Smaller installed dimensional envelope
Temperature/Pressure Ratings
  • Pressure and temperature ratings of Flexible Components' sanitary assemblies are dependent on clamp pressure and gasket material ratings
  • Clamps:
    -Standard weight style: 150
    PSIG @ 70ºF (21ºC): 125
    PSIG @ 250ºF (121ºC)
    -Heavyweight style: 500
    PSIG @ 70ºF (21ºC): 125
    PSIG @ 250ºF (121ºC)
    -High pressure bolt style:
    1500 PSIG 70ºF (21ºC);
    125 PSIG @ 250ºF (121ºC)
  • Gaskets:
    -Above 250ºF (121ºC). PTFE, Viton® or silicone gaskets are recommended