Description

The DuraFab® Mechanical Series features a more textured surface, and provides the most cost effective solution for mechanical applications. These fabrics are manufactured from woven fiberglass substrates and have a moderate PTFE content. These fabrics are lightweight and possess good release characteristics for less demanding or less critical applications. The non-porous Mechanical Fabrics are ideal for applications where a mechanical impression must be transferred to a seal or a surface texture is required.

DuraFab® PTFE Coated Fabric Characteristics

DuraFab® Fabrics are engineered to retain the distinctive properties of PTFE; however, by adding a glass fabric to the matrix, AFC is able to obtain the added benefits of dimensional stability, durability, excellent tensile strength and extremely low elongation (<1%). DuraFab® Fabrics have received USDA approval for food processing and handling, and are FDA compliant (21CFR177.1550). In addition, the DuraFab® fabrics can operate in temperatures from -400ºF(-240ºC) under static conditions and -100ºF (-73º C) under dynamic conditions up to 550ºF (288ºC).

Typical Applications:
  • Packaging
  • Food Products
  • Printing and Textiles
  • Polymer Processing
  • Building Products
  • Chemical Processing
  • Aerospace, Communications & Military
  • Other Applications
Unit of Measure
Items
DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics

DuraFab® 22 Series Mechanical Fabrics
Nominal Thickness N/A 0.003 in N/A 0.003 in N/A 0.003 in N/A 0.005 in N/A 0.005 in
Width N/A 40 in N/A 80 in N/A Slit N/A 40 in N/A 80 in
Weight N/A 0.20 lbs/yd² N/A 0.20 lbs/yd² N/A 0.20 lbs/yd² N/A 0.37 lbs/yd² N/A 0.37 lbs/yd²
Tensile Wrap
N/A 56 lbs/in² N/A 56 lbs/in² N/A 56 lbs/in² N/A 100 lbs/in² N/A 100 lbs/in²
Tensile Fill
N/A 32 lbs/in² N/A 32 lbs/in² N/A 32 lbs/in² N/A 112 lbs/in² N/A 112 lbs/in²
Edge Tear Wrap N/A 380 g N/A 380 g N/A 380 g N/A 800 g N/A 800 g
Edge Tear Fill N/A 250 g N/A 250 g N/A 250 g N/A 700 g N/A 700 g
Packaging N/A
  • Impulse/l-Bar sealing
  • Form fill and seal
  • Over wrapping (Tray packing)
  • Side and End sealing
  • Blister tray covers
  • Vacuum pack machines
Food Products N/A
  • Oven and microwave liners for home and industrial kitchens
  • Kitchen work surfaces
Printing and Textiles N/A
  • Heat transfer presses
Polymer Processing N/A
  • Vulcanizing presses
  • Rubber curing presses
Building Products N/A
  • Manufacture of specialty wood-based products
Chemical Processing N/A
  • Tank seals and contaminant barriers
  • Gaskets, membranes, seals & diaphragms
  • Corrosion resistant chute, drum, and hopper liners
  • Protective curtains and aprons
Aerospace, Communications & Military N/A
  • Composite mold release/bonding
  • Vacuum bagging
Other Application N/A
  • Insulation and protection
  • Release sheets/separation materials
  • Manufacture of metalized balloons
  • Abrasive disk manufacturing
  • Work surface covering
Fabrication Capabilities N/A AFC offers the following fabrication capabilities and services for its fabrics:
  • Conveyor belting
  • Specialty fabrication
  • Custom fabric and tape slitting
  • Fabric and tape sheeting
  • Custom die cutting
  • Belt and fabric perforating
Fabric Treatments and Specialty Coatings N/A AFC can specially treat its fabrics to provide an adhesive (tape), bondable, abrasion resistant, or static-dissipative surface. In addition, the company also specialty coats fabrics to meet specific application needs.
Notes N/A Although material width is standard, additional lead-time may be required.
Additional thicknesses and styles available upon special order.
N/A Additional thicknesses and styles available upon special order. N/A Additional thicknesses and styles available upon special order. N/A Although material width is standard, additional lead-time may be required.
Additional thicknesses and styles available upon special order.
N/A Although material width is standard, additional lead-time may be required.
Additional thicknesses and styles available upon special order.