Aeroquip Protective Coils, Sleeves & Clamps
-fittings-aeroquip-protective-coils-sleeves-clamps
Construction: steel wire, rust resistant
Sizes available: 0.61", 0.67", 0.73", 0.80", 0.85", 0.91", 1.04", 1.18", 1.34", 1.66", 1.87", 2.12", 2.37", 2.75" and 2.87" I.D.'s. /Asset/Aeroquip 900564 Steel Protective Coil Spring.jpg
Sizes Available: 0.25", 0.38", 0.50", 0.63", 0.75", 1.00", 1.38" and 1.88" I.D.'s. /Asset/Aeroquip 900952 Plastic Protective Coil Sleeve.jpg
Applications:
Aeroquip 222005/222022 Internal Support Coils
(17)- Recommended for vacuum service with most hoses. 222005/222022 is stainless steel
- Sizes Available: .34", .42", .51", .60", .73", .94", 1.19", 1.44", 1.88" and 2.44" O.D.'s.
Aeroquip 900705 Steel Protective Coil Sleeve
(17)- Recommended for use where hose lines are subjected to excessive abrasion, kinking or accidental damage. Construction: spring steel, rust resistant.
- Sizes available: .44", .50", .57", .63", .75", .88", 1.03", 1.13", 1.22", 1.47", 1.69", 1.91", 2.00", 2.13", 2.44", 2.56" and 2.75" I.D.'s
Aeroquip 900564 Steel Protective Coil Spring
(15) Protects hose cover and reinforcement from abrasion and accidental damage.Construction: steel wire, rust resistant
Sizes available: 0.61", 0.67", 0.73", 0.80", 0.85", 0.91", 1.04", 1.18", 1.34", 1.66", 1.87", 2.12", 2.37", 2.75" and 2.87" I.D.'s. /Asset/Aeroquip 900564 Steel Protective Coil Spring.jpg
Aeroquip 900952 Plastic Coil Sleeve
(8) Recommended to protect hose from abrasion, this light weight plastic sleeve is unaffected by air, water, oil, gasoline, hydraulic and most other fluids. This coil can be used for group bundling of hose lines. Temperature Range 0ºF to +180ºF.Sizes Available: 0.25", 0.38", 0.50", 0.63", 0.75", 1.00", 1.38" and 1.88" I.D.'s. /Asset/Aeroquip 900952 Plastic Protective Coil Sleeve.jpg
Aeroquip FC425 Nylon Abrasion Sleeve
(13)- Meets MSHA requirements.
- Nylon sleeve protects hose from abrasion and allows bundling of hose lines.
- Sizes Available: .71", 1.00", 1.25", 1.59", 1.75", 2.07", 2.38", 2.54", 2.86", 3.34" and 3.66" I.D.'s.
- Note: The maximum O.D. of hose fittings must be allowed for if fittings are to be covered.
Aeroquip 624 Firesleeve
(24)- Firesleeve will protect hose from direct flame. Firesleeve is constructed of uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber. Temperature range of -65ºF to +500ºF
- Sizes available: .31", .44", .50", .56", .62", .69", .75", .81", .88", 1.00", 1.12", 1.25", 1.38", 1.50", 1.62", 1.75", 1.88", 2.00", 2.38", 2.62", 2.88", 3.12", 3.38" and 3.75" I.D.'s.
Aeroquip FF9217 Firesleeve Clamp
- FF9217 firesleeve clamp is recommended for attaching 624 firesleeves to hose lines.
Aeroquip 900729 Support Clamp
(28)- These lightweight neoprene-coated steel support clamps are designed to support hose where long runs are necessary.
- This clamp not only provides a cleaner installation, it prevents damage, exposure and chafing.
- The neoprene lining will withstand high ambient temperatures.
- Sizes Available: .25", .38", .44", .50", .56", .63", .69", .75", .81", .94", 1.00", 1.06", 1.13", 1.19", 1.25", 1.31", 1.50", 1.56", 1.75", 1.81", 2.00", 2.06", 2.25", 2.50", 2.63", 2.75", 2.88" and 3.56".
Aeroquip FF90311 Heavy Duty Hose Support Clamps
(26) These heavy-duty, weld based clamps are designed to securely hold hose in applications subject to impulsing, flexing, and vibrating conditions. These clamps help prevent abrasion and extend hose life through proper routing. Clamps are rated to ambient temperature of +250ºF.Applications:
- For use with hoses on mobile and industrial hydraulic equipment
- Weld-base design or drill and tap mounting allows for easy installation
- Perfect to control boom and mast lines
- Custom styles available upon request
- Wide array of sizes to fit most hose styles (0.50" through 2.75")
- Easy to assemble and disassemble for serviceability
- Route hose assemblies for longer service life, safety and serviceability
- Heavy duty clamps reduce shock and controls hydraulic impulse spikes
- Minimize abrasion between hoses and against frame edges
- Smooth clamping contour ensures proper hose grip