All Categories > Industrial Hose Fittings, Couplings & Clamps > Shank/Water Fittings > King Combination Nipples > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

King Combination Nipples

Check up to five results to perform an action.

Features:
  • Combination nipples are recommended for low-pressure discharge and suction service for compatible liquids.
    They are not for compressible products such as air or nitrogen on sizes 1 1/4" and above.
  • King Combination Nipples are not recommended for steam.
  • The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
  • In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
Safety Alert: Boss couplings and the steam quick disconnects are the only Dixon couplers recommended for steam service




   
  Results 1 - 25 of 135  1 2 3 4 5 »  

Item #

Size

Type

Material

Opt Qty

AST1 1/2 in NPT Threaded End with Knurled Wrench Grip Aluminum 50
BST1 1/2 in NPT Threaded End with Knurled Wrench Grip Brass N/A
STC1 1/2 in NPT Threaded End with Knurled Wrench Grip Plated Steel 50
STB1 1/2 in Beveled End Unplated Steel 50
SAP1 1/2 in NPT End with Knurled Wrench Grip - for Plastic Pipe Plated Steel 50
RST1 1/2 in NPT Threaded End no Knurl 316 Stainless Steel 50
ST1 1/2 in NPT Threaded End with Knurled Wrench Grip Unplated Steel 50
BST5 3/4 in NPT Threaded End with Knurled Wrench Grip Brass N/A
STB5 3/4 in Beveled End Unplated Steel 50
RST5 3/4 in NPT Threaded End no Knurl 316 Stainless Steel 50
ST5 3/4 in NPT Threaded End with Knurled Wrench Grip Unplated Steel 50
AST5 3/4 in NPT Threaded End with Knurled Wrench Grip Aluminum 50
STC5 3/4 in NPT Threaded End with Knurled Wrench Grip Plated Steel 50
SAP6 3/4 in NPT End with Knurled Wrench Grip - for Plastic Pipe Plated Steel 50
RSTB5 3/4 in Beveled End 316 Stainless Steel 50
STC10A 1 in BSPT End Plated Steel 50
RST10 1 in NPT Threaded End no Knurl 316 Stainless Steel 50
ST10 1 in NPT Threaded End with Knurled Wrench Grip Unplated Steel 50
STV10 1 in Grooved End Unplated Steel 50
STB10 1 in Beveled End Unplated Steel 50
RSTB10 1 in Beveled End 316 Stainless Steel 50
ASTB10 1 in Beveled End Aluminum N/A
RST10A 1 in BSPT End 316 Stainless Steel 50
STC10 1 in NPT Threaded End with Knurled Wrench Grip Plated Steel 50
AST10 1 in NPT Threaded End with Knurled Wrench Grip Aluminum N/A
  Results 1 - 25 of 135  1 2 3 4 5 »