All Categories > Hose for Material Handling, Dust & Fume Control > Gas & Fume Exhaust Hoses > Master-Clip HT 2010 > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Master-Clip HT 2010

Check up to five results to perform an action.

Material
Hose wall: Three-layer construction, asbestos-free, high-temperature fabrics, special coated with heat-stabilizers
External helix: stainless steel
Color: Red
Temperature Range: -75°F up to +2010°F, intermittent to 2370°F
Small amounts of smoke may be given off when used under positive pressure or with low extraction rates








Applications

  • Extremely high temperatures
  • Exhaust fume extraction from large engines and high performance test beds in the motor vehicle industries
  • Extraction under stray sparks
  • Shipbuilding industry
  • vehicle and engine construction
  • Diesel exhaust
  • Suction plants
  • Aircraft and defense industries
  • Extraction of aircraft engine fumes
  • Furnace construction
  • Iron and steel works
  • General engineering
  • Radiant heat protection
  • Low pressure applications

Properties

  • Flame-resistant
  • Very high temperature resistance
  • Silicone-free
  • Flexible
  • Compressibility 1:2
  • Small bend radius
  • External steel helix protects against abrasion
  • Special clamping method guarantees high tensile strength between hose material and external helix
  • To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet

Available on Request

  • Special lengths
  • Special diameters metric




   
  Results 1 - 25 of 25 1 

Item #

Diameter

Positive Pressure

Bend Radius

Weight

Length

Master-Clip-HT-2010-3.00 3.00 in 201 in. w.c. 1.80 in 1.00 lbs/ft 25 ft
Master-Clip-HT-2010-3.50 3.50 in 161 in. w.c. 2.16 in 1.14 lbs/ft 25 ft
Master-Clip-HT-2010-4.00 4.00 in 141 in. w.c. 2.40 in 1.29 lbs/ft 25 ft
Master-Clip-HT-2010-4.50 4.50 in 121 in. w.c. 2.64 in 1.45 lbs/ft 25 ft
Master-Clip-HT-2010-5.00 5.00 in 109 in. w.c. 3.00 in 1.60 lbs/ft 25 ft
Master-Clip-HT-2010-5.50 5.50 in 79 in. w.c. 3.36 in 1.77 lbs/ft 25 ft
Master-Clip-HT-2010-6.00 6.00 in 69 in. w.c. 3.60 in 1.93 lbs/ft 25 ft
Master-Clip-HT-2010-6.40 6.40 in 64 in. w.c. 3.84 in 2.09 lbs/ft 25 ft
Master-Clip-HT-2010-7.00 7.00 in 59 in. w.c. 4.20 in 2.24 lbs/ft 25 ft
Master-Clip-HT-2010-8.00 8.00 in 49 in. w.c. 4.80 in 2.57 lbs/ft 25 ft
Master-Clip-HT-2010-9.00 9.00 in 42 in. w.c. 6.32 in 2.89 lbs/ft 25 ft
Master-Clip-HT-2010-10.00 10.00 in 39 in. w.c. 7.00 in 3.20 lbs/ft 25 ft
Master-Clip-HT-2010-11.00 11.00 in 37 in. w.c. 7.72 in INQ lbs/ft 25 ft
Master-Clip-HT-2010-12.00 12.00 in 33 in. w.c. 8.40 in 3.85 lbs/ft 25 ft
Master-Clip-HT-2010-13.00 13.00 in 25 in. w.c. 9.12 in INQ lbs/ft 25 ft
Master-Clip-HT-2010-14.00 14.00 in 20 in. w.c. 9.80 in 4.49 lbs/ft 25 ft
Master-Clip-HT-2010-15.00 15.00 in 16 in. w.c. 10.52 in INQ lbs/ft 25 ft
Master-Clip-HT-2010-16.00 16.00 in 16 in. w.c. 11.20 in 5.25 lbs/ft 25 ft
Master-Clip-HT-2010-18.00 18.00 in 12 in. w.c. 14.40 in 6.15 lbs/ft 25 ft
Master-Clip-HT-2010-20.00 20.00 in 11 in. w.c. 16.00 in 7.19 lbs/ft 25 ft
Master-Clip-HT-2010-22.00 22.00 in 10 in. w.c. 17.60 in INQ lbs/ft 25 ft
Master-Clip-HT-2010-24.00 24.00 in 8 in. w.c. 19.20 in 8.40 lbs/ft 25 ft
Master-Clip-HT-2010-28.00 28.00 in 6 in. w.c. 22.40 in 9.83 lbs/ft 25 ft
Master-Clip-HT-2010-32.00 32.00 in 5 in. w.c. 25.60 in 11.50 lbs/ft 25 ft
Master-Clip-HT-2010-36.00 36.00 in 4 in. w.c. 28.80 in 13.50 lbs/ft 25 ft
  Results 1 - 25 of 25 1