All Categories > Hose for Material Handling, Dust & Fume Control > Gas & Fume Exhaust Hoses > Master-Clip HT 1200 > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Master-Clip HT 1200

Check up to five results to perform an action.

Material
Hose wall double layer 
Inner hose wall: heat resistant fabric
Outer hose wall: special coated high temperature fabric, asbestos free, reinforced by woven in stainless steel wire
External helix: galvanized steel
Color: red
Temperature Range: -5°F up to +1200°F, intermittent to 1300°F
Small amounts of smoke may be given off when used under positive pressure or with low extraction rates









Applications

  • Exhaust fume extraction from high performance test beds in the motor vehicle industries
  • Diesel exhaust
  • Automotive manufacturing
  • Aircraft manufacturing
  • Furnace construction
  • Iron and steel works
  • Infrared dryer plants
  • Shipbuilding industry
  • Defense industry
  • General engineering
  • Suction plants
  • Radiant heat protection
  • Primarily suited as extraction hose

Properties

  • Flame-resistant
  • Very high temperature resistance
  • Silicone-free
  • Highly flexible
  • Extreme compressibility 1:6
  • Small bend radius
  • Improved vacuum resistance by woven in reinforcement
  • External steel helix protects against abrasion
  • Suitable for continually flexing
  • Special clamping method guarantees high tensile strength between hose material and external helix
  • To maximize life of duct and exhaust system effectiveness, it is recommended to utilize a negative pressure exhaust system and introduce ambient air at the inlet

Available on Request

  • Special lengths
  • Custom design with other pitches and helix sizes
  • External helix also in stainless steel
  • Special diameters metric




   
  Results 1 - 25 of 27 1 2 

Item #

Diameter

Positive Pressure

Bend Radius

Weight

Length

Master-Clip-HT-1200-2.00 2.00 in 362 in. w.c. 1.20 in 0.64 lbs/ft 25 ft
Master-Clip-HT-1200-2.50 2.50 in 251 in. w.c. 1.56 in 0.73 lbs/ft 25 ft
Master-Clip-HT-1200-3.00 3.00 in 201 in. w.c. 1.80 in 0.83 lbs/ft 25 ft
Master-Clip-HT-1200-3.50 3.50 in 161 in. w.c. 2.16 in 0.94 lbs/ft 25 ft
Master-Clip-HT-1200-4.00 4.00 in 141 in. w.c. 2.40 in 1.07 lbs/ft 25 ft
Master-Clip-HT-1200-4.50 4.50 in 121 in. w.c. 2.64 in 1.20 lbs/ft 25 ft
Master-Clip-HT-1200-5.00 5.00 in 109 in. w.c. 3.00 in 1.33 lbs/ft 25 ft
Master-Clip-HT-1200-5.60 5.60 in 79 in. w.c. 3.36 in 1.46 lbs/ft 25 ft
Master-Clip-HT-1200-6.00 6.00 in 69 in. w.c. 3.60 in 1.58 lbs/ft 25 ft
Master-Clip-HT-1200-6.40 6.40 in 64 in. w.c. 3.84 in 1.72 lbs/ft 25 ft
Master-Clip-HT-1200-7.00 7.00 in 59 in. w.c. 4.20 in 1.85 lbs/ft 25 ft
Master-Clip-HT-1200-8.00 8.00 in 49 in. w.c. 4.80 in 2.10 lbs/ft 25 ft
Master-Clip-HT-1200-9.00 9.00 in 42 in. w.c. 6.32 in 2.37 lbs/ft 25 ft
Master-Clip-HT-1200-10.00 10.00 in 39 in. w.c. 7.00 in 2.63 lbs/ft 25 ft
Master-Clip-HT-1200-11.00 11.00 in 37 in. w.c. 7.72 in INQ lbs/ft 25 ft
Master-Clip-HT-1200-12.00 12.00 in 33 in. w.c. 8.40 in 3.16 lbs/ft 25 ft
Master-Clip-HT-1200-13.00 13.00 in 25 in. w.c. 9.12 in INQ lbs/ft 25 ft
Master-Clip-HT-1200-14.00 14.00 in 20 in. w.c. 9.80 in 3.67 lbs/ft 25 ft
Master-Clip-HT-1200-15.00 15.00 in 16 in. w.c. 10.52 in INQ lbs/ft 25 ft
Master-Clip-HT-1200-16.00 16.00 in 16 in. w.c. 11.20 in 4.26 lbs/ft 25 ft
Master-Clip-HT-1200-18.00 18.00 in 12 in. w.c. 14.40 in 4.94 lbs/ft 25 ft
Master-Clip-HT-1200-20.00 20.00 in 11 in. w.c. 16.00 in 5.72 lbs/ft 25 ft
Master-Clip-HT-1200-22.00 22.00 in 10 in. w.c. 17.60 in INQ lbs/ft 25 ft
Master-Clip-HT-1200-24.00 24.00 in 8 in. w.c. 19.20 in 6.65 lbs/ft 25 ft
Master-Clip-HT-1200-28.00 28.00 in 6 in. w.c. 22.40 in 7.71 lbs/ft 25 ft
  Results 1 - 25 of 27 1 2