All Categories > Industrial Hose Fittings, Couplings & Clamps > Shank/Water Fittings > External Swage Notched NOS Stems > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

External Swage Notched NOS Stems

Check up to five results to perform an action.

Features:
  • The largest advantage of the notched design is that the coupling can be removed from a damaged hose by cutting away the ferrule, without necessarily damaging the fitting. After inspection of the fitting to determine its suitability for reuse, it can be reinstalled into another hose by using a new ferrule.
  • The notched system allows you to better manage your inventories. You can stock one stem and two ferrules, and cover the same hose range with less inventory. You must purchase a fitting and the matching ferrule to create an assembly.

  • For hose outside diameters of 2 4/64" and below, the couplings are crimp only.
  • For hose outside diameters of 2 5/64" and above, the couplings can be crimped or swaged.
Only use the NOS shank with the NOS ferrules.
Due to differences in dimensions and tolerances for safety reasons, do not use other manufacturer's stems or ferrules with Dixon Holedall products.

Safety Alert: Boss couplings and the steam quick disconnects are the only Dixon couplers recommended for steam service




   
  Results 1 - 8 of 8 1 

Item #

Size

Pressure Rating

Material

RST150NOS 1-1/2 in 250 psi 316 Stainless Steel
STC150NOS 1-1/2 in 250 psi Plated Carbon Steel
STC200NOS 2 in 250 psi Plated Carbon Steel
RST200NOS 2 in 250 psi 316 Stainless Steel
STC300NOS 3 in 250 psi Plated Carbon Steel
RST300NOS 3 in 250 psi 316 Stainless Steel
RST400NOS 4 in Contact Factory 316 Stainless Steel
STC400NOS 4 in Contact Factory Plated Carbon Steel
  Results 1 - 8 of 8 1