Unit of Measure
Technical Data
|
Product Designation
|
Product Construction/Design
|
Product Characteristics
|
Additional Technical Information
|
Notes
Technical Data
Thickness |
N/A 1.2 mm0.05 in |
Mass of Belt (Belt Weight) |
N/A 1.3 kg/m²0.27 lbs/ft² |
Min. Pulley Diameter with Counter Flection |
N/A 20 mm0.8 in |
Tensile Force for 1% Elongation (k1% Static) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
N/A 4.6 N/mm26 lbs/in |
Tensile Force for 1% Elongation after Relaxation (k1 % relaxed) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
N/A 2.2 N/mm13 lbs/in |
Min. Continuous Operating Temperature Admissible |
N/A -20 ºC-4 ºF |
Max. Continuous Operating Temperature Admissible |
N/A 60 ºC140 ºF |
Coefficient of Friction of Driving Pulley of Steel |
N/A 0.2 |
Seamless Manufacturing Width |
N/A 1200 mm47 in |
Product Designation
Product Group |
N/A Hamid Machine Tapes |
Main Industry Segments |
N/A Paper converting Paper manufacturing and processing Paper printing and finishing |
Belt Applications |
N/A Machine tape Paper handling belt Sheeter/Crosscutter belt |
Special Features |
N/A Abrasion resistant Constant and gentle positive grip |
Mode of Use/Conveyance |
N/A Declined Horizontal Inclined Twists with short center distance Vertical |
Product Construction/Design
Conveying Side (Material) |
N/A Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side (Surface) |
N/A Fine structure |
Conveying Side (Property) |
N/A Adhesive |
Conveying Side (Color) |
N/A Green |
Traction Layer (Material) |
N/A Polyamide (PA) |
Number of Fabrics |
N/A 1 |
Running Side/Pulley Side (Material) |
N/A Hamid |
Running Side/Pulley Side (Surface) |
N/A Smooth |
Running Side/Pulley Side Property |
N/A Non-adhesive |
Running Side/Pulley Side (Color) |
N/A Black |
Product Characteristics
Slider Bed Suitable |
N/A Yes |
Carrying Rollers Suitable |
N/A Yes |
Troughed Installation Suitable |
N/A No |
Antistatically Equipped |
N/A Yes |
Additional Technical Information
Chemical Resistance Class |
N/A 2 (These indications are not guarantees of properties) |
Installation and Handling Instructions |
N/A Do not go below initial elongation (epsilon) ~ 0.3%.; Install the slack belt and tension until running perfectly under the full belt load. |
Limitations |
N/A Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment. |
