All Categories > Industrial Conveyor Belting > Conveyor Belting > Power Transmission > Machine Tapes & Round Tapes > Machine Tapes > Item # F-1  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # F-1, Machine Tapes









Technical Data  · Product Designation  · Product Construction/Design  · Product Characteristics  · Additional Technical Information  · Notes

Technical Data

Thickness

1.25 mm
0.05
in

Mass of Belt (Belt Weight)

1.25 kg/m²
0.26
lbs/ft²

Min. Pulley Diameter with Counter Flection

40 mm
1.6
in

Tensile Force for 1% Elongation (k1% Static) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)

8.5 N/mm
49
lbs/in

Tensile Force for 1% Elongation after Relaxation (k1 % relaxed) per unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)

2.6 N/mm
15
lbs/in

Min. Continuous Operating Temperature Admissible

-20 ºC
-4
ºF

Max. Continuous Operating Temperature Admissible

100 ºC
212
ºF

Coefficient of Friction of Driving Pulley of Steel

0.15

Seamless Manufacturing Width

1200 mm
47
in


Product Designation

Product Group

Polyamide Machine Tapes

Main Industry Segments

Paper manufacturing and processing

Belt Applications

Machine tape

Special Features

Abrasion resistant
Constant coefficient of friction

Constant grip and release property

Forgiving in case of short term shock like overloads

Mode of Use/Conveyance

Declined
Horizontal

Inclined

Twists with short center distance

Vertical


Product Construction/Design

Conveying Side (Material)

Acrylonitrile-Butadiene-Rubber (NBR)

Conveying Side (Surface)

Rough structure

Conveying Side (Property)

Adhesive

Conveying Side (Color)

Green

Traction Layer (Material)

Polyamide (PA)

Number of Fabrics

2

Running Side/Pulley Side (Material)

Acrylonitrile-Butadiene-Rubber (NBR)

Running Side/Pulley Side (Surface)

Impregnated fabric

Running Side/Pulley Side Property

Non-adhesive

Running Side/Pulley Side (Color)

Green


Product Characteristics

Slider Bed Suitable

Yes

Carrying Rollers Suitable

Yes

Troughed Installation Suitable

No

Antistatically Equipped

Yes


Additional Technical Information

Chemical Resistance Class

2 (These indications are not guarantees of properties)

Installation and Handling Instructions

Do not go below initial elongation (epsilon) ~ 0.5%.; Install the slack belt and tension until running perfectly under the full belt load.

Limitations

Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user's analysis in the respective environment.


Notes
All data are approximate values under standard climatic conditions: 23ºC/73ºF, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.