Ball Valves
ball-valves
Note: 1/4 turn handle can be adjusted to any orientation. Notches on the valve stem reflect the three openings on the ball. 3-way-diverting-ball-valve-.jpg
Solder End Brass Ball Valves
(6) Features:- Designed for the best protection against potential gas leakage under extreme duty or low pressure applications.
- Rated to 600 PSI WOG; 150 PSI Working Steam Pressure
- Maximum temperature 366°F
- Underwriters Listed
- Full port
- Brass body
- Blow-out proof stem
- Chrome-plated brass ball
- Adjustable stem packing nut
- PTFE seats, seals, and thrust washer
Domestic Brass Ball Valves (Female NPT x Female NPT)
(10) Features:- For control of air, water, oil and gas in hose or pipe lines for other services, please contact the factory
- Rated to 600 PSI WOG; 150 PSI saturated steam
- Brass valve bodies, balls and stems
- Blow-out proof stems
- Glass-filled reinforced PTFE seats and stuffing box ring; stem seals and washers
- Plated steel handles and nuts with vinyl sleeves, full port and standard port valves are both repairable
- 1/4" - 1/2" full port; 3/4" - 3" standard port
- Meets WW-V 35C, Type II Composition
- Ball valve handle replacements available, consult Dixon for pricing.
Locking Handle Brass Ball Valves (Female NPT x Female NPT)
(8) Features:- For control of air, water, oil and gas in hose or pipe lines for other services, please contact the factory
- Rated to 600 PSI WOG; 150 PSI saturated steam
- Blow-out proof RPTFE stem
- Chrome-plated brass ball
- Stainless steel sliding lock mechanism secures handle in open or closed position; can be padlocked opened or closed.
- Plated steel handles and nuts with vinyl sleeves, full port and standard port valves are both repairable
- 1/4" - 1/2" full port; 3/4" - 2" standard port
Domestic Full Port Ball Valves (Female NPT x Female NPT)
(5) Features:- Machined solid chrome-plated ball
- Multi-fill PTFE seats and seals
- Adjustable packing
- Blow-out proof stem design
- Bronze castings
- Full port
- Vacuum service to 29 inches Hg
- Rated to 600 PSI WOG; 150 PSI saturated steam
Imported Brass Ball Valves (Female NPT)
(26) Features:- For control of air, water, oil and gas in hose or pipe lines for other services, please contact Dixon
- Rated to 600 PSI WOG; 150 PSI Working Steam Pressure
- Forged brass bodies
- Blow-out proof stems
- PTFE seats, seals and thrust washers
- Chrome-plated brass balls and plated steel handles
- Full or Standard port
- Maximum temperature 366ºF
- Underwriters Listed for 1/4" through 4" full port valves
- NSF61 approved
Global Brass Ball Valves (Female NPT x Female NPT)
(8) Features:- For water and air only
- 1/4" - 3/8" rated to 365 PSI; 1/2" - 2" rated to 600 PSI
- Body: forged brass
- Maximum temperature 248ºF (120ºC)
250 lb Steam Ball Valve (Female NPT x Female NPT)
(4) Features:- Recommended for use with fluids with widely varying temperatures and/or thermal expansion rates
- Rated to 600 PSI; 250 PSI saturated steam
- Vacuum service to 29 inches Hg
- Threaded bronze valve
- 316 stainless steel ball and stem
- Blow-out proof stem design
- Multi-fill RPTFE seats
- Multi-fill stuffing box ring
- High temperature MTFE stem packing
- Adjustable packing gland
- 1/2" full port; 3/4" - 2" standard port
- Maximum temperature rating 406ºF
'Deadman' Spring Return Handle Ball Valves (Female NPT x Female NPT)
(11) stainless-deadman-spring-re.jpg 3-Way Diverting Ball Valves (T Flow Pattern)
(6) Features:- Rated to 400 PSI WOG; 100 PSI saturated steam
- Brass body
- Blow-out proof stem
- Chrome plated brass ball
- PTFE seats, seals, and thrust washer
- Adjustable stem packing
- Standard port
- Maximum temperature: 344ºF
Note: 1/4 turn handle can be adjusted to any orientation. Notches on the valve stem reflect the three openings on the ball. 3-way-diverting-ball-valve-.jpg
3-Way Diversion Ball Valves (L Flow Pattern)
(6) Female NPT x Female NPT x Female NPT 3-way-diversion-ball-valve_.jpg Brass Ball Valves (Female NPT x Male NPT)
(3) Features:- For air service only
- Rated to 600 PSI
- Lockable ball valves vent downstream air in accordance with OSHA regulation 1910.147 for pneumatic systems.
- 1/2" full port; 3/4" - 1" standard port
- Brass valve
- Chromium plated ball
- RTFE seats and stuffing box ring
- Blow-out proof stem design
- Adjustable packing gland
Safety Vented Ball Valves (Female NPT x Female NPT)
(8) Features:- For air service only
- Rated to 600 PSI
- Lockable ball valves vent downstream air in accordance with OSHA regulation 1910.147 for pneumatic systems.
- 1/4" - 1/2" full port; 3/4" - 2" standard port
- Brass valve
- Chromium plated ball
- RTFE seats and stuffing box ring
- Blow-out proof stem design
- Adjustable packing gland
Bronze Ball Valve w. NPT Tap for Drain (Female NPT x Female NPT)
(5) Features:- Recommended for water and air service
- Rated to 125 PSI WOG
- Brass ball valves vent downstream air in accordance with OSHA regulations for pneumatic systems
- Chromium plated ball
- RTFE seats and stuffing box ring
- Blow-out proof stem design
- Adjustable packing gland
- Full port
- Auto-drain / auto-vent
- A 1/4" NPT tapped port provides additional options such as an air venting elbow or noise muffler.
Mini Ball Valves (Female NPT x Female NPT)
(4) Features:- Rated to 450 PSI
- Nickel plated brass body
- PTFE seats and Buna-N stem seal
- Blow-out proof stem
- 1/4" and 3/8" full port; 1/8" and 1/2" standard port
- Maximum temperature 330ºF
- American Gas Association and Canadian Gas Association approved
Carbon Steel Ball Valves (Female NPT x Female NPT)
(8) Features:- For control of air, water, oil and gas in hose or pipe lines, for other services, please contact the factory
- Rated to 150 PSI saturated steam
- 1/4" - 1" rated to 2000 PSI; 1 1/4" - 2" rated to 1500 PSI
- Carbon steel body
- Chromium plated ball
- RPTFE seats and seals
- Blow-out proof stem
- Adjustable packing gland
- 1/4" and 3/8" full port; 1/2" - 2" standard port
High Pressure Full-Bore Ball Valves (Female x Female)
(21) Features:- Blow out proof stem
- Rugged construction
- Viton® shaft seals
- Female thread
Sanitary 2-Way 3 Piece Encapsulated Ball Valves
(8) Features:- 1/2" - 2" rated at 1,000 PSI WOG; 2 1/2" - 4" rated at 800 PSI WOG
- Balanced encapsulated construction minimizes cold flow
- Live loaded stem packing
- Precision stainless steel balls reduce torque and friction losses while extending seat life
- Operating parts are stainless steel type CF8M (316) conforming to ASTM A351, (MTRs available upon request)
- Integral ISO 5211 mounting pad
- ID polish is Ra 32 minimum
- Lockable handle can prevent accidental actuation
- Standard internal entry blow out proof stem design
- Full port design matches ball and seat ports to tube ID for lower pressure drop and less turbulent flow
- Compact design for areas with tight space restrictions
- Fully encapsulated construction produces bubble tight seal
- Identification tagging available
- Virgin PTFE seats
Sanitary Non-Encapsulated 2-Way 3 Piece Stainless Steel Ball Valves
(8) Features:- Blow-out proof stem
- Live-loaded stem packing
- 15% glass reinforced PTFE seats
- CF8M stainless body, ends and ball
- ID polish is Ra 32
- Lock-out, tag out
- Rated to 1/2" - 2" 1000 PSI WOG
2 1/2" - 4" 800 PSI WOG
Full Port Stainless Steel Ball Valves (Female NPT x Female NPT)
(10) Features:- For use in water, oil and gas
- 1/4" - 2" rated to 1000 PSI WOG (CWP); 2 1/2" - 3" rated to 800 PSI WOG (CWP); 100 PSI saturated steam
- 316 stainless steel body, ball and stem
- PTFE seat, joint gasket and thrust washer
- Plastic cover on handle
- Blow-out proof stem design
- Full port
- Temperature range -20ºF to 450ºF
